Skip to main content

10 Crafty Tips

Ten crafty tips I hope you will find useful and will make your crafty life easier

1) Soak your paint brushes in fabric conditioner for ten minutes before using them and paint will wipe of them easily.

2) Use a magnet to find lost pins and sewing needles

3) Sharpen blunt scissors by cutting through sandpaper a few times.

4) Wipe a tiny bit of petroleum jelly on the nozzle of your glue gun and it will prevent those annoying glue strings.

5) Clean shells you have collected for projects in a solution of half bleach and half water.

7) For a project that needs to be turned to work from different sides use a lazy susan, remember to cover it with a protective mat.

8) Wipe scissors with a baby wipe before cutting sticky tape. It will help prevent it sticking to your scissors.

9) Add a drop of washing up liquid to acrylic paint to prevent beading on the surface.

10) Punch cooking foil a few times to sharpen paper punches.

Comments

Popular posts from this blog

Christmas Wreath Decoration.

I made this Wreath using files from a Carnation crafts Christmas usb. It was really easy to make. It comes with all of the mats and layers you need as well as all of the decoupage. There are 3 mat layers. I cut two base layers in black, a middle layer in gold and the top layer in black. I cut two base layers because I have put a ribbon loop at the top so you can hang the finished Wreath up. I simply held the ribbon in place with a piece of tape and then sandwiched it between the two black base layers. Then I added the gold layer and finally the black top layer. Next was the decoupage. I printed the decoupage onto 128gsm Navigator paper. This is my go to paper. The print quality is exellent. I get mine in bulk from amazon but if you have a Wilko nearby they sell it as well. I glued the base layer in place flat. Then I added the decoupage pieces using silicone glue. I shaped the pieces to give a better effect by just gently moulding the pieces with my fingers. The sentiment was cut from ...

How A Scan and Cut Can Help With Your Crafting

1. So, you're interested in buying a Brother Scan and Cut SDX 1200?   The Brother Scan and Cut SDX 1200 is a great machine that can help you with your crafts. If you are interested in buying a Brother Scan and Cut SDX 1200, then you should read this article. In this article, you will learn about the features of the Brother Scan and Cut SDX 1200 and how it can help you with your crafts.   2. Why the Brother Scan and Cut SDX 1200 is perfect for crafters   The Brother Scan and Cut SDX 1200 is an all-in-one device for crafters. Whether you are a professional or just getting started with crafts, the Brother Scan and Cut SDX 1200 is the perfect device for your needs.   Here are some of the features that make this device perfect for crafters:   - Scanning and cutting: The Brother Scan and Cut SDX 1200 comes with a built-in scanner that can scan and identify various shapes and sizes of material. This gives you the ability to create precision cuts for a variety of projec...

Christmas Album Page 2

Today I have made page 2 of my Classic Christmas Mini Album. Page 2 is a lovely waterfal page. Again I cut the base page to 7.5x7.5 ins. The waterfall pages are 6.5 ins wide x 5ins high. Then scored at  .5 of an inch on the short side. The closure mechanism is 2 ins wide and 6ins long. I then scored at .5 of an inch on the long side. I added glue to this small flap and glued the strip centrally at the bottom of the page. Then I added the main page mat which I cut at 7.25x7.25 ins. The waterfall mats all measure 6.25x4.25ins and we're glued in place. Next I added glue to the flaps on the waterfall pages. Be carefully to line them up properly. I added a tiny topper at the top of the closure. I added a magnet to the back of the topper and the front of the top waterfall page. Remember to do this before you add your decorative paper. If you would like to see a video of how I made this page here is the link  Page 2 I have also made a short video showing how I add pages to my albums which...